Skip to content

Dasharo compatibility: Docking station detect

Test cases

Common

Test setup

  1. Proceed with the Generic test setup: firmware.
  2. Proceed with the Generic test setup: OS installer.
  3. Proceed with the Generic test setup: OS installation.
  4. Proceed with the Generic test setup: OS boot from disk.
  5. The docking station connected to the USB-C port.

DUD001.001 Docking station detection after coldboot (Ubuntu 22.04)

Test description

This test aims to verify that the DUT properly detects the docking station after coldboot (realized by power supply cutting off then restoring back). This test case may be re-done several times to specify the platform and connection stability.

Test configuration data

  1. FIRMWARE = coreboot
  2. OPERATING_SYSTEM = Ubuntu 22.04

Test setup

  1. Proceed with the Common section.

Test steps

  1. Cut the power off while DUT is turned on.
  2. Restore power and power on the DUT.
  3. Boot into the system.
  4. Log into the system by using the proper login and password.
  5. Open a terminal window and run the follwing command:

    lsusb
    
  6. Note the results.

Expected result

After lsusb command the docking station entries should be displayed, but output can be different depending on the model of the docking station.

Example entries signifing the docking station:

Bus 002 Device 010: Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
Bus 002 Device 009: Prolific Technology, Inc. USB SD Card Reader
Bus 002 Device 008: VIA Labs, Inc. USB3.0 Hub

DUD002.001 Docking station detection after warmboot (Ubuntu 22.04)

Test description

This test aims to verify that the DUT properly detects the docking station after warmboot (realized by device turning off then turning on). This test case may be re-done several times to specify the platform and connection stability.

Test configuration data

  1. FIRMWARE = coreboot
  2. OPERATING_SYSTEM = Ubuntu 22.04

Test setup

  1. Proceed with the Common section.

Test steps

  1. Power on the DUT.
  2. Boot into the system.
  3. Log into the system by using the proper login and password.
  4. Open a terminal window and run the follwing command:

    lsusb
    
  5. Note the results.

Expected result

After lsusb command the docking station entries should be displayed, but output can be different depending on the model of the docking station.

Example entries signifing the docking station:

Bus 002 Device 010: Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
Bus 002 Device 009: Prolific Technology, Inc. USB SD Card Reader
Bus 002 Device 008: VIA Labs, Inc. USB3.0 Hub

DUD003.001 Docking station detection after reboot (Ubuntu 22.04)

Test description

This test aims to verify that the DUT properly detects the docking station after system reboot (performed by relevant command). This test case may be re-done several times to specify the platform and connection stability.

Test configuration data

  1. FIRMWARE = coreboot
  2. OPERATING_SYSTEM = Ubuntu 22.04

Test setup

  1. Proceed with the Generic test setup: firmware.

Test steps

  1. Power on the DUT.
  2. Boot into the system.
  3. Log into the system by using the proper login and password.
  4. Open a terminal window and run the follwing command:

    sudo reboot
    
  5. Boot into the system.

  6. Log into the system by using the proper login and password.
  7. Open a terminal window and run the follwing command:

    lsusb
    
  8. Note the results.

Expected result

After lsusb command the docking station entries should be displayed, but output can be different depending on the model of the docking station.

Example entries signifing the docking station:

Bus 002 Device 010: Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
Bus 002 Device 009: Prolific Technology, Inc. USB SD Card Reader
Bus 002 Device 008: VIA Labs, Inc. USB3.0 Hub