Dasharo Compatibility: Thunderbolt docking station Display ports

Test cases common documentation

Test setup

1. Proceed with the Generic test setup: firmware.
2. Proceed with the Generic test setup: OS installer.
3. Proceed with the Generic test setup: OS installation.
4. Proceed with the Generic test setup: OS boot from disk.
5. The Thunderbolt docking station connected to the Thunderbolt port.

TDP001.001 HDMI display (Ubuntu 22.04)

Test description

This test aims to verify that the display connected with the HDMI cable to the docking station is correctly recognized by the OPERATING_SYSTEM.

Test configuration data

1. FIRMWARE = Dasharo
2. OPERATING_SYSTEM = Ubuntu 22.04
3. Connect an HDMI cable to the docking station and a display.

Test setup

1. Proceed with the Test cases common documentation section.

Test steps

1. Power on the DUT.
2. Boot into the system.
3. Log into the system by using the proper login and password.
4. If using more than one display, switch the display mode between Mirror and Join Displays.

Expected result

The image should be displayed on the external HDMI-connected display in Mirror and Join Displays modes.

TDP001.002 HDMI display (Windows 11)

Test description

This test aims to verify that the display connected with the HDMI cable to the docking station is correctly recognized by the OPERATING_SYSTEM.

Test configuration data

1. FIRMWARE = Dasharo
2. OPERATING_SYSTEM = Windows 11
3. Connect an HDMI cable to the docking station and a display.

Test setup

1. Proceed with the Test cases common documentation section.

Test steps

1. Power on the DUT.
2. Boot into the system.
3. Log into the system by using the proper login and password.
4. If using more than one display, switch the display mode between Duplicate and Extend.

Expected result

The image should be displayed on the external HDMI-connected display in Duplicate and Extend modes.

TDP002.001 DP display (Ubuntu 22.04)

Test description

This test aims to verify that the display connected with the HDMI cable to the docking station is correctly recognized by the OPERATING_SYSTEM.

Test configuration data

1. FIRMWARE = Dasharo
2. OPERATING_SYSTEM = Ubuntu 22.04
3. Connect a Display Port cable to the docking station and a display.

Test setup

1. Proceed with the Test cases common documentation section.

Test steps

1. Power on the DUT.
2. Boot into the system.
3. Log into the system by using the proper login and password.
4. If using more than one display, switch the display mode between Mirror and Join Displays.

Expected result

The image should be displayed on the external DisplayPort-connected display in Mirror and Join Displays modes.

TDP002.002 DP display (Windows 11)

Test description

This test aims to verify that the display connected with the DisplayPort cable to the docking station is correctly recognized by the OPERATING_SYSTEM.

Test configuration data

1. FIRMWARE = Dasharo
2. OPERATING_SYSTEM = Windows 11
3. Connect a DisplayPort cable to the docking station and a display.

Test setup

1. Proceed with the Test cases common documentation section.

Test steps

1. Power on the DUT.
2. Boot into the system.
3. Log into the system by using the proper login and password.
4. If using more than one display, switch the display mode between Duplicate and Extend.

Expected result

The image should be displayed on the external DisplayPort-connected display in Duplicate and Extend modes.

TDP003.001 Triple display (Ubuntu 22.04)

Test description

This test aims to verify that the three display simultaneously connected to the docking station is correctly recognized by the OPERATING_SYSTEM.

Test configuration data

1. FIRMWARE = Dasharo
2. OPERATING_SYSTEM = Ubuntu 22.04
3. Connect three displays using HDMI/DisplayPort cables, depending on the specifications of the docking station.

Test setup

1. Proceed with the Test cases common documentation section.

Test steps

1. Power on the DUT.
2. Boot into the system.
3. Log into the system by using the proper login and password.
4. Switch the display mode between Mirror and Join Displays.

Expected result

The image should be displayed on the three external displays in Mirror and Join Displays modes.

TDP003.002 Triple display (Windows 11)

Test description

This test aims to verify that the three display simultaneously connected to the docking station is correctly recognized by the OPERATING_SYSTEM.

Test configuration data

1. FIRMWARE = Dasharo
2. OPERATING_SYSTEM = Windows 11
3. Connect three displays using HDMI/DisplayPort cables, depending on the specifications of the docking station.

Test setup

1. Proceed with the Test cases common documentation section.

Test steps

1. Power on the DUT.
2. Boot into the system.
3. Log into the system by using the proper login and password.
4. If using more than one display, switch the display mode between Duplicate and Extend.

Expected result

The image should be displayed on the three external displays in Duplicate and Extend modes.