Skip to content

Overview

The Vault Pro is a small form network appliance built for use as a firewall / router, virtualization platform, a daily-driven personal computer, and more. The VP2420 is based on a 4 x 2.5 G network port design that leverages a low power, but versatile Intel Celeron J6412 CPU.

The VP2420 can accommodate up to 32 GB DDR4 RAM and 2 TB M.2 SATA SSD storage drive (Note: The VP2420 supports M.2 SATA drives, not NVMe drives). The built-in 8 GB eMMC module can be used for booting a light-weight OS for example, or for use as optional storage.

VP2410 specification:

  • Intel Celeron® J6412 Quad Core at 2 GHz (Burst up to 2.6 GHz)
  • 4 Intel® 2.5 Gigabit Ethernet NIC ports
  • M.2 SATA SSD Slot (Note: This device does not support NVMe drives)
  • 8 GB eMMC module on board
  • Intel® AES-NI support
  • Fanless and Silent
  • Included 12v Power Supply, VESA mount kit, Serial Console Cable, SATA data and power cables for internal SSD, Quick Start Guide

For more information please refer to the references below.

References

Documentation sections

  • Releases - groups information about all releases.
  • Building manual - describes how to build Dasharo for Protecli 2420.
  • Initial deployment - describes initial Dasharo deployment methods (i. e. flashing new firmware) for Protectli VP2420.
  • Recovery - gathers information on how to recover the platform from potential failure.
  • Hardware configuration matrix - describes the platform's hardware configuration used during the Dasharo firmware validation procedure.
  • Test matrix - describes validation scope used during Dasharo firmware validation procedure.