Skip to content

Firmware update

The following documentation describes the process of Dasharo open-source firmware update. If your device is currently flashed with the proprietary firmware please refer to the Initial deployment documentation.

The update process may be different, depending on the currently installed Dasharo firmware version.

For simplicity of the process we recommend using Dasharo Tools Suite.

Before starting the update procedure be sure to disable Dasharo BIOS Boot medium lock and Secure Boot:

  1. Power on the device.
  2. While the device is booting, hold the DELETE key to enter the UEFI Setup Menu.
  3. Enter the Dasharo System Features menu using the arrow keys and Enter.
  4. Enter the Dasharo Security Options submenu.
  5. Verify the state of the Lock the BIOS boot medium option - if the option is chosen, press Space and then F10 to save the changes.
  6. Go back to the main menu using the ESC key.
  7. Enter the Device Manager menu.
  8. Enter the Secure Boot Configuration submenu.
  9. Verify that the Current Secure Boot State field says Disabled - if not, unselect the Attempt Secure Boot option below then press F10 to save the changes.
  10. Reboot the device to properly apply the changes.

The settings of all the above options can be restored after a firmware update.

Updating Dasharo manually

flashrom -p internal -w hardkernel_odroid_h4_v<version>.rom --fmap -i WP_RO -i RW_SECTION_A