Skip to content

Dasharo compatibility: Custom boot menu key

Test cases

CBK001.001 Custom boot menu key

Test description

This test aims to verify that the DUT is configured to use custom boot menu and setup menu (if it exists) hotkeys.

Test configuration data

  1. FIRMWARE = coreboot

Test setup

  1. Proceed with the Generic test setup: firmware.

Test steps

  1. Power on the DUT.
  2. Hold the BIOS_SETUP_KEY to enter the UEFI Setup Menu.
  3. Once the DUT has booted into the setup menu, power it off using the power button.
  4. Power on the DUT again.
  5. Hold the BOOT_MENU_KEY to enter the UEFI Boot Menu.

Expected result

The DUT boots into an UEFI Setup menu and Boot menu using the specified hotkeys.