Dasharo Security: Network stack enable/disable

Test cases common documentation

Test setup

1. Proceed with the Generic test setup: firmware.
2. The DUT should be connected to the Internet by using an Ethernet cable.

NBA001.001 Enable Network Boot (firmware)

Test description

This test aims to verify that the Network Boot option might be enabled. If this option is activated, an additional option in the Boot menu which allows to boot the system from iPXE servers will appear.

Test configuration data

1. FIRMWARE = Dasharo

Test setup

1. Proceed with the Test cases common documentation section.

Test steps

1. Power on the DUT.
2. While booting, press the SETUP_MENU_KEY to enter Setup Menu.
3. Enter the Networking Options menu option.
4. Verify that the Enable Network Boot field is checked - if not, use Spacebar to change option settings.
5. Save using F10, and exit from the menu using Esc.
6. Reboot the device.
7. While booting, press BOOT_MENU_KEY on the USB keyboard to enter Setup Menu.
8. Note the results.

Expected result

The Network Boot option in the Boot menu should be visible.

NBA002.001 Disable Network Boot (firmware)

Test description

This test aims to verify that the Network Boot option might be disabled. If this option is deactivated, an additional option in the Boot menu which allows to boot the system from iPXE servers will be hidden.

Test configuration data

1. FIRMWARE = Dasharo

Test setup

1. Proceed with the Test cases common documentation section.

Test steps

1. Power on the DUT.
2. While booting, press the SETUP_MENU_KEY to enter Setup Menu.
3. Enter the Networking Options menu option.
4. Verify that the Enable Network Boot field is checked - if so, use Spacebar to change option settings.
5. Save using F10, and exit from the menu using Esc.
6. Reboot the device.
7. While booting, press BOOT_MENU_KEY on the USB keyboard to enter Setup Menu.
8. Note the results.

Expected result

The Network Boot option in the Boot menu should not be visible.