Hardware configuration matrix
Introduction
This document describes the hardware configuration used for validation of the
coreboot port on the ASRock Rack TURIND8UD-2T/X550.
Main components
| Component |
Description |
| CPU |
AMD EPYC 9115 |
| CPU cooler |
ARCTIC Freezer 4U-SP5 (single tower, AMD SP5) |
| RAM |
Kingston 16GB ECC Registered DDR5 1Rx8 5600MHz |
|
PC5-44800 RDIMM (KSM56R46BS8PMI-16HAI) |
| BIOS Flash memory |
Winbond W25Q256JVFQ |
| BMC Flash memory |
Macronix MX25L51245G |
| Network |
Local network wired connection |
| Storage |
Kingston KC3000 512GB M.2 2280 PCIe Gen4 x4 NVMe SSD |
| Power Supply |
Seasonic VERTEX GX-750 (750W, 80 Plus Gold) |
| Power Control |
NOUS A1T smart outlet |
| Case |
NZXT H5 Flow (2024) Tempered Glass, White |
| Remote Testing Environment |
RTE v1.1.0 (firmware v0.7.5) connected via RS232 |
| TPM |
ASRock TPM-SPI module (Infineon) |
Miscellaneous components
| Component |
Description (if applicable) |
| IDC to RS232 adapter |
StarTech |
| DuPont 2.0mm to 2.54mm pitch cables |
|
| 2x5 1.27mm pitch header to individual 2.54mm female DuPont connector cables |
|
| RTE mount with base |
3D Printed |
| RS232 null modem cable |
|
| RTE hat with mux |
|
| PCIe x1 I/O shield with 2x keystone |
3D Printed |
| USB-A to USB micro-B cable |
|
| RJ45 Ethernet cable |
|
| USB-A to USB micro-B keystone |
|
| RJ45 to RJ45 keystone |
|
| RTE power supply |
|