Dasharo Compatibility: Embedded controller flashing

ECF001.001 EC firmware external flashing

Test description

This test aims to verify whether there is the possibility to flash the DUT EC firmware externally using Arduino.

Test configuration data

1. FIRMWARE = Dasharo

Test setup

1. Proceed with the Generic test setup: firmware.
2. Make yourself familiar with EC recovery documentation.

Test steps

1. Prepare the hardware for flashing in accordance with the Prerequisites section.
2. Prepare the firmware in accordance with the Preparation section.
3. Flash the EC firmware in accordance with the Flashing section.
4. Note the results.

Expected result

The output of the last command should contain information about the correctly performed procedure:

Successfully programmed SPI ROM