Building manual
Requirements
- Docker
- Git
sudo apt-get install git
Building
To build Dasharo firmware image, follow the steps below:
-
Clone the coreboot repository:
git clone https://github.com/Dasharo/coreboot.git -b protectli_vault_kbl/release
To build a specific version replace protectli_vault_kbl/release
to
protectli_vault_kbl_v1.0.x
where x
is the version number.
-
Start build process (note it requires certain blobs to proceed):
cd coreboot git submodule update --init --checkout # you will need to obtain the ZIP with blobs at this point unzip protectli_blobs.zip -d 3rdparty/blobs/mainboard ./build.sh fw6