Hardware configuration matrix
Introduction
This document describes the hardware configuration used for validation of the coreboot port on the ASRock Rack SPC741D8-2L2T/BCM.
| Component | Description |
|---|---|
| CPU | Intel Xeon Silver 4410Y |
| Arctic Freezer 4U-M Rev. 2 | |
| RAM | Micron RDIMM DDR5 16GB 1Rx8 4800MHz PC5-38400 ECC |
| Flash memory | Winbond W25Q512FV |
| Network | Local network wired connection |
| Attached devices | 1. Goodram 16GB USB stick |
| 2. Kingston KC3000 512GB M.2 2280 PCI-E x4 Gen4 NVMe SSD | |
| 3. Samsung 990 PRO NVMe SSD | |
| Power Supply | SeaSonic Vertex GX 850W |
| Power Control | 1. Sonoff S20 switch |
| 2. Goldpin cables (RTE <-> Board connection) | |
| Remote Testing Environment | RTE v1.1.0 (firmware v0.7.5) connected via RS232 |
| TPM | ASROCK TPM-SPI (Nuvoton NPCT750) |